D-Link DWS-3160-24TC/E 20 x 10/100/1000BaseT + 4 combo SFP (non-PoE) wireless controller Switch

https://cloudone.co/web/image/product.template/3935/image_1920?unique=a6fcf16

    37,950.00 Kshs 37,950.00 Kshs 37950.0 KES

    270.88

    Option not available

    This combination does not exist.

    Add to Cart

    Terms and Conditions
    30-day money-back guarantee
    Shipping: 2-3 Business Days

    D-Link DWS-3160-24TC/E 20 x 10/100/1000BaseT + 4 combo SFP (non-PoE) wireless controller Switch

    Part Number: DWS-3160-24TC/E

    The DWS-3160 is D-Link’s latest Unified L2+ Gigabit Wireless Switch. Designed to be the ideal mobility solution for medium-sized and large enterprises and service providers, the DWS-3160 empowers administrators to exercise total control over their wireless networks by centralizing all aspects of provisioning and management. Able to manage up to 48 D-Link Unified Access Points by itself and up to 192 in a Peer Group, the DWS-3160 can be configured to act either as a Wireless Controller in the core network and as an L2+ Gigabit Switch at the edge, enabling it to be seamlessly integrated into any existing network infrastructure. The DWS-3160 comes in two models with or without PoE support.

    Simplified Management

    The DWS-3160 is able to centralize all critical WLAN management, thereby eliminating the need to manage access points individually. The administrator simply assigns a profile to an individual D-Link Unified Access Point, and the configuration corresponding to that profile would be applied onto that access point automatically. In addition, the DWS-3160 can apply new firmware to all D-Link Unified Access Points on the network, thus greatly simplifying the upgrade process.

    The DWS-3160 also excels as an advanced L2+ switch. Complete with RIPv1/v2 dynamic routing, ACL security, multi-layer QoS, comprehensive VLAN support, as well as Multicast Snooping capabilities, the DWS-3160 enables easy and flexible deployment. Furthermore, multiple DWS-3160s can form a Peer Group, which enables the administrator to configure all switches from one Peer Group Master. As the size of the Peer Group grows, so can the number of D-Link Unified Access Points being managed. Up to 192 D-Link Unified Access Points may be managed by a Peer Group. This helps to significantly simplify management and reduce maintenance efforts when a network is scaled up.

    Trusted Security

    The DWS-3160 offers a state-of-the-art Wireless Intrusion Detection System (WIDS), which empowers administrators to detect Rogue Access Points and Rogue Clients, effectively preventing them from causing damage to the network. The administrator can also activate various threat detections and use Radio Frequency Scan to sweep the entire wireless network to identify any possible security breach in advance.

    When working in conjunction with D-Link Unified Access Points, Virtual Access Points may be easily configured and managed, allowing the administrator to assign different access privileges to different classes of users. In addition to WPA and WPA2, an added measure of protection is added with an advanced captive portal, thus enabling only authorized users to utilize the wireless network. On the wired side, the DWS-3160 utilizes Access Control Lists to tightly control what goes in and out of the network by setting up a number of simple rules. Along with other advanced security features, such as 802.1X Network Access Control and advanced Denial-of-Service Protection, the DWS-3160 provides robust and centralized security, ensuring maximum network reliability.

    Network Resiliency

    When a number of access points are deployed close to each other, interference may result if proper RF management is not implemented. The DWS-3160 is aware of how the radio spectrum is being utilized in the network and will automatically assign the most optimized channel to each access point under its management. This greatly reduces RF interference and will allow the administrator to deploy APs more densely.

    To further minimize interference, the DWS-3160 also can adjust the transmit power of each radio independently. When, for whatever reason, there is no longer so many access points present, transmission power will be increased to expand network coverage. To ensure that no access point is overburdened while others sit idle, the DWS-3160 will prevent certain D-Link Unified Access Points from accepting new association requests if its resources are fully utilized. A neighboring D-Link Unified Access Point will instead pick up the load. This ensures that proper load balancing is in place, and the network will function in the most optimal state.

    Seamless Mobility

    Wireless clients can enjoy seamless and uninterrupted roaming from AP to AP if they are managed by the same DWS-3160, even if they are not in the same subnet. Because the DWS-3160 employs various mechanisms such as pre-authentication and key caching, wireless users can freely roam the entire network without needing to re-authenticate. This allows tablet and smartphone and netbook computer users to travel freely within any premises covered by the DWS-3160’s managed APs without having to worry about network connectivity, thus enabling a truly mobile workplace.

    SPECIFICATION

    Size

    19-inch Standard Rack-Mount Width, 1U Height

    Network Interfaces

    20 10/100/1000Base-T

    4 Combo 10/100/1000Base-T/SFP

    Console Port

    RJ45 RS-232

    MAC Address Table

    16K

    Maximum Power Consumption

    37.7 W

    Switching Capacity 

    48 Gbps

    Maximum Forwarding Rate

    35.71 Million Packets per Second

    Forwarding Method

    Store and Forward

    Packet Buffer Memory

    Up to 256 static MAC entries

    Enable/disable auto-learning of MAC addresses

    Number of VLANs per Device

    4K

    Static Routes

    512

    Jumbo Frames

    13K

    MTBF 

    561,829 hours

    Acoustic

    Below 30 °C (86 °F)< 46.3 dB

    Over 30 °C (86 °F):< 33.0 dB

    Heat Dissipation

    128.6 BTU/hr

    Dimensions

    440 x 210 x 44 mm (17.32 x 8.27 x 1.73 inches)

    Redundant Power Supply

    DPS-200

    Weight (without optional module)

    2.55 kg (5.63 pounds)

    Operating Temperature

    0 to 50 °C (32 to °F)

    Storage Temperature

    -40 to 70 °C ( to 158 °F)

    Operating Humidity

    10% to 90% RH

    Storage Humidity

    5% to 90% RH

    EMI Certifications

    FCC Class A

    CE

    ICES-003

    C-Tick

    VCCI

    Safety

    UL/cUL

    CB

    Management 

    Manages up to 48 Unified Access Points per switch, up to 192 APs per cluster

    Switch Cluster for Single IP Management

    SSH

    SSL

    SNMP v1, 2c, 3

    sFlow

    Dual Image Support

    Web GUI

    Command Line Interface

    AP Management

    AP Auto-Discovery

    Remote AP Reboot

    AP Monitoring: List Managed AP, Rogue AP, Authentication Failed AP

    Client Monitoring: List clients associated with each Managed AP

    Ad-hoc Client Monitoring

    AP Authentication Supporting Local Database and External RADIUS Server

    Centralized RF/Security Policy Management

    Automatic AP RF Channel Adjustment

    Automatic AP Transmit Output Power Adjustment

    Centralized Firmware Upgrade

    Managed Unified Access Points

    DWL-3600AP

    DWL-6600AP

    DWL-8600AP

    Roaming

    Fast Roaming

    Intra-Switch/Inter-Switch Roaming

    Intra-Subnet/Inter-Subnet Roaming

    Access Control & Bandwidth Management

    Up to 32 SSID per AP (16 SSID per frequency band)

    AP Load Balancing based on the number of users or AP utilization

    Flexible Mapping Schemes

    L2 Features

    IGMP Snooping

    MLD Snooping

    802.1D/w/s Spanning Tree

    802.3ad Link Aggregation

    802.1ab LLDP

    Port Mirroring (One-to-One and Many-to-One)

    Jumbo Frame Size: Up to 13 KB

    L3 Features

    IPv4/v6 Static Route

    Routing Table Size: 512 Static Routes

    VRRP

    ARP Proxy

    LAN Security

    RADIUS Authentication Management Access

    TACACS+ Authentication for Management Access

    SSH & SSL Support

    MAC Filtering

    802.1X Port-based Access Control & Guest VLAN

    Denial of Service Protection

    Dynamic ARP Inspection

    Protected Port

    Broadcast Storm Control

    Access Control List

    MIB

    1213 MIB II

    1493 Bridge MIB

    1907 SNMP v2 MIB

    1215 Trap Convention MIB

    2233 Interface Group MIB

    D-Link Private MIB

    LLDP MIB

    Power-Ethernet MIB

    LAN Flow Control

    802.3x Standard in Full-Duplex Mode

    Back Pressure in Half-Duplex Mode

    Head-of-Line Blocking Prevention

    QoS (Quality of Service)

    Voice VLAN

    Wireless Multimedia (WMM)

    802.1p Priority Queues

    CoS-based QoS

    Per-Flow Bandwidth Control

    Per-Port Traffic Shaping

    Minimum Bandwidth Guarantee

    VLAN

    802.1Q VLAN Tagging

    802.1V

    Subnet-based VLAN

    MAC-based VLAN

    GVRP

    Double VLAN

    Voice VLAN

    WLAN Security

    WPA Personal/Enterprise

    WPA2 Personal/Enterprise

    64/128/152-bit WEP Data Encryption

    MAC Authentication

    Station Isolation

    Wireless Station and AP Monitoring based on RF Channel, MAC Address, SSID, Time

    Rogue AP and Client Detection & Mitigation

    Captive Portal

    Security Profile

    802.1X Support

    Guest VLAN

    Product Datasheet

    This is a preview of the recently viewed products by the user.
    Once the user has seen at least one product this snippet will be visible.

    Recently viewed Products